3331 Rear Axle Carrier
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (REAR AXLE CARRIER)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear axle carrier to body | F54/F55/F56/F57/F60 | M12 | 100 Nm | |
| 2AZ Cross member/bridge to rear axle support | F54/F55/F56/F60 | M12 | Replace screws. | |
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Cross member to body | F54 ALL/F60 ALL | M12 | 100 Nm | |
| 4AZ Cross member to rear axle final drive | F54 ALL/F60 ALL | M10 | 56 Nm | |
| 5AZ Hydraulic vibration absorber to cross member | F54 ALL/F60 ALL | M12 | Replace screw. | 96 Nm |
| 6AZ Vibration absorber to cross member | F54 ALL/F60 ALL | M8 | Replace screw. | 28 Nm |
| 7AZ Additional mass to cross member | F54 ALL/F60 ALL | M8 | Replace screw. | 28 Nm |
| 8AZ Cover to cross member/rear axle differential | F54 ALL/F60 ALL | M6 | 12 Nm |