LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (General Electrical System - Repair (F56) -- Cooper, F56) >> Switches >> 61 31 021 Remove and install/replace ring aerial

61 31 021 Remove and install/replace ring aerial

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Removal: 

If required, unlock and disconnect connector.

Unlock latch mechanism and pull ring aerial (1) upwards out of steering column shroud (2).

Fig 1: Pulling Ring Aerial Out Of Steering Column Shroud
G11649828Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Join ring aerial (1) in steering column shroud (2).

If required, connect connector.

NOTE: Make sure ring aerial (1) is correctly locked in steering column shroud (2).
Fig 2: Pulling Ring Aerial Out Of Steering Column Shroud
G11649828Courtesy of BMW OF NORTH AMERICA, INC.