61 61... Adjusting wiper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 61 6 100
A correctly adjusted contact angle of the wiper arms to the windscreen increases the wiping quality. Consult the vehicle specific repair instructions for adjustments.
A/B = Distance between wiper blade (2) and trim panel on cowl panel (1)
NOTE:
Measurement is taken at the height of the locators (3) for the windscreen wiper arms
C= Contact angle between wiper blade center plane and windscreen
When adjusting with special tool 61 6 100, set the scale value in accordance with the following table.
For RHD vehicles, change the preceding sign of the scale values.
- LHD cars, scale range 0 to -10
- RHD cars, scale range 0 to +10
| Model | Contact angle (C) on windscreen wiper arm | Scale value (LHD) on special tool | Setting dimension (A, B) on windscreen wiper arm | ||||
|---|---|---|---|---|---|---|---|
| Front passenger side | Driver's side | Front passenger side | Driver's side | Front passenger side | Driver's side | Rear end | |
| R50/R52/R53 | 87° ±1° | 87° ±1° | -3 | -3 | 59 ±2.5 mm | 49 ±2.5 mm | 44 ±3 mm |
| R55 | 87° ±1° | 87° ±1° | -3 | -3 | 46 ±2.5 mm | 40 ±2.5 mm | 18 mm |
| R56/R58/R59 | 87° ±1° | 87° ±1° | -3 | -3 | 46 ±2.5 mm | 40 ±2.5 mm | 38 mm |
| R60/R61 | 87° ±1° | 87° ±1° | -3 | -3 | 46 ±2.5 mm | 40 ±2.5 mm | 40 mm |