61 35 095 Removing and installing/replacing control unit/module for seat heating

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Attention !

Read and comply with NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Removal:

NOTE: To facilitate installation/removal of control unit, move seat upwards and to the rear fully.

Fig 1: Removing Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect all connectors (1).

Press control unit/module for seat heating (2) first in direction of arrow (4) and then simultaneously in direction of arrow (5) and feed out of the plastic holder (3).

Installation:

Feed control unit/module for seat heating (2) into the plastic holder (3) first in direction of arrow (4) and then engage in direction of arrow (5).

Connect all connectors (1).

Fig 2: Installing Control Unit/Module For Seat Heating Into Plastic Holder

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Make sure control unit/module for seat heating (2) is correctly engaged.