Instructions for removing and installing ear clips (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 32 1 260
NOTE:
The work steps are show on assorted components.
Ear clip must always be replaced.
To remove an ear clip, place special tool 32 1 260 at right angle to ear and cut ear open.
The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.
Attach hook fastener and press ear together with special tool 32 1 260.
The diagonal cutting pliers of special tool 32 1 260 can be used in areas which are difficult to access.
IMPORTANT:
Gap (A) max. 1 mm!