Tires: checking and if necessary correcting inflation pressure, checking condition, tread depth and pattern (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- Checking tire pressure:
- Check tire pressure in accordance with label on B-pillar
- Check tire condition:
- Check tread depth of all tires with tire tread gauge
- Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws
- Check tread wear pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer and issue a separate invoice for this work
NOTE:
- For details of approved wheel and tire combinations see the applicable BMW parts catalog
- For reason of driving safety, only use tires of the same design and tire tread on a single vehicle
- Inform customer of any incorrect or worn tires