Pre-delivery check (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Quality assurance by MINI service
Model:
Vehicle ident. no.:
(Please mark where appropriate)
If necessary Quick Reference Guide: Discussed and handed over
Included with the vehicle: Owner's Manual(s)
Maintenance record booklet (with national-market version Korea only)
Vehicle key/remote control key If necessary - spare key
The vehicle document portfolio is in the vehicle the vehicle:
Glove compartment storage box Luggage compartment
I hereby confirm that I have received the vehicle in perfect condition.
Place and date
Signature of vehicle owner
Pre-delivery check by MINI service
Scopes of inspection: To be kept with the workshop documents
The following work must be carried out on the vehicle by MINI service prior to delivery.
Model:
Vehicle ident. no.:
| Scopes of inspection: to be kept with the workshop documents | |||||
|---|---|---|---|---|---|
| Accessory items | OK. | Not OK | not present | ||
| Install other enclosed parts scopes (in the China market only: Remove high-visibility vest from trunk and place in driver's door storage compartment) | |||||
| Tighten rod antenna to stop. Check correct installation. | |||||
| If part of the enclosed parts scope: Install on-board device for electronic toll collection (dual chip electronic toll tag, OBU) (in case of equipment specification with SA4VE electronic toll system) (only in the Chinese market). Assembly instructions |
|||||
| If fitted: Print operating instructions for on-board device for electronic toll collection (electronic toll tag, OBU) in good printing quality and stow in the vehicle (in case of equipment specification with SA4VE electronic toll system) (only in the Chinese market). Rider's Manual |
|||||
| Carry out "CBS pre-delivery check" in the Service Function path under Maintenance | |||||
| Deactivate transportation mode | |||||
| Reset average mileage/kilometers driven | |||||
| Enter first registration | |||||
| Set on-board date | |||||
| Set statutory inspection dates (1). | |||||
| Enter service telephone numbers | |||||
| BMW TeleServices (1): Activation | |||||
| Navigation system (1): Activate the roadmap. Check the up-to-dateness of the roadmap and update if necessary. | |||||
| Check battery, observe notes in the diagnostic system, if applicable, charge battery | |||||
| Delete fault memory | |||||
| Carry out vehicle test, eliminate faults if necessary | |||||
| Engine compartment | OK. | Not OK | not present | ||
| Check for cleanliness | |||||
|
NOTE:
The cooling system may be filled above the maximum mark at the factory. Do not adapt the coolant level. The normal condition of the coolant is reached in the course of driving.
|
|||||
| Fluid tank for washer fluid | OK. | Not OK | not present | ||
| Check fluid level and top up if necessary, where required with antifreeze additive | |||||
| Labels | OK. | Not OK | not present | ||
| Affix sticker for BMW roadside assistance | |||||
| Body, interior equipment, vehicle underbody | OK. | Not OK | not present | ||
| Check for transportation damage | |||||
| Spring blocker (1) | OK. | Not OK | not present | ||
| Remove | |||||
| Tires | OK. | Not OK | not present | ||
| Checking tire pressure Observe note on tolerance compensation for tire pressure monitor! |
|||||
| Initialize flat tire monitor (FTM) or tire pressure monitor (TPM) | |||||
| For winter tires (1) attach the label V-max. | |||||
| Maintenance record booklet (1) (with national-market version Korea only) | OK. | Not OK | not present | ||
| Stamp pre-delivery check/enter vehicle identification number | |||||
| Attach documentation (glove compartment/storage box/trunk) | OK. | Not OK | not present | ||
| Rider's Manual | |||||
| Maintenance record booklet (with national-market version Korea only) | |||||
| Booklet, contact | |||||
| Booklet, BMW Roadside Assistance | |||||
| Include key/remote control (make note of number) | |||||
| Indicator/warning lights and Check Control | OK. | Not OK | not present | ||
| Check and remove fault if applicable | |||||
| Service and parking brake | OK. | Not OK | not present | ||
| Transport and immobilization periods of 3-6 weeks: Check for correct operation | |||||
| In event of transportation and immobilization periods of more than 6 weeks: Brake in | |||||
| Interior rearview mirror with digital compass (1) | OK. | Not OK | not present | ||
| Calibrate system | |||||
| Transportation lock (1) and vehicle cleaning | OK. | Not OK | not present | ||
| Remove the TRANSPORTATION PROTECTIVE FILM | |||||
| Clean inside and outside of vehicle | |||||
| Notes: | |||||
|
|||||
Date
Mechanic
Workshop Supervisor