Removing and installing anti-roll bar link for left or right anti-roll bar (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove front WHEEL .

Removal:

Release nuts (1); if necessary, grip at inner Torx socket.

Remove anti-roll bar link (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert anti-roll bar link (2) on anti-roll bar and spring strut.

Part : Replace nuts (1).

Tighten nuts (1), if required counter support at Torx socket.

Tightening torque 31 35 1/2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install front WHEEL .