Removing and installing/replacing chain tensioner (B36 engine) (Cooper base)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work needed:
- Remove CATALYTIC CONVERTER .
Removal:
Release chain tensioner (1).
IMPORTANT:
Have a cleaning cloth ready. A small quantity of motor oil will leakage after the screw connection has been released.
Installation:
If the chain tensioner is reused, its oil chamber must be drained.
Place chain tensioner on a level support and slowly compress.
Repeat process twice.
Parts: Replace sealing ring (1).
Release chain tensioner (1).
Tightening torque 11 12 5AZ .
Required reworking:
- Install CATALYTIC CONVERTER .