13 62 Sensor For Control Unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (SENSORS FOR CONTROL UNIT)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Camshaft position sensor to cylinder head | B36/B38/B46/B48 | TS5x20 | 4 Nm | |
| 2AZ Crankshaft sensor to crankcase | B36/B38/B46/B48 | 4.6 Nm | ||
| 3AZ Knock sensor to crankcase | B36/B38/B46/B48 | M8x30 | 21.5 Nm | |
| 4AZ Boost pressure sensor | B36/B38/B46/B48 | 4 Nm | ||
| 5AZ Coolant temperature sensor, coolant | B36/B38/B46/B48 | M12x1.5 | 18 Nm | |
| 6AZ Hot film air-mass meter to intake filter housing | B36/B38/B46/B48 | TS4x16 | 1.5 Nm | |
| 7AZ Differential pressure sensor for the gasoline particulate filter at the holder | B36/B38/B46/B48 | 4 Nm |
TIGHTENING TORQUE SPECIFICATION
| Pressure line on catalytic converter | ||
| Coupling nut | Tightening torque | 20 Nm |