Position of shaped parts for cavity sealing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
To reduce interior noise and avoid condensation, cavities in certain areas of the body are closed off. To do this, shaped parts are inserted in the cavities. These shaped parts adapt themselves optimally due to heating of the body to approx. 180 °C by expanding to the shape of the cavities.
Because it is not possible to heat the body to this extent for a body repair, a different procedure has been specified for this situation. Refer to INSTALLING CAVITY SEALING WITH 2-COMPONENT PU CAVITY FOAM , INSTALLING CAVITY SEALING (EXPANDED) , and INSTALLING CAVITY SEALING (NOT EXPANDED) .