Programming the control unit (DME/DDE) (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Switch off ignition.

Connect diagnostic system.

Switch the ignition on.

Select "Programming".

Follow the instructions in the diagnostic system.

Adjust the following control units:

EWS (electronic immobilizer)
DME (Digital Motor Electronics) or
DDE (Digital Diesel Electronics)

Follow Service Information "Diagnosis and Coding" on the topic of programming.