2211 Engine Mounting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (ENGINE MOUNTING)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mount to cylinder head | F54/F55/F56/F57/F60 | M10 10.9 | Replace screws Joining torque Angle of rotation |
40 Nm 90° |
| 2AZ Engine mount to side member | F54/F55/F56/F57/F60 | M12 10.9 | 100 Nm | |
| 3AZ Engine mounting bracket to cylinder head | F54/F55/F56/F57/F60 | M10 8.8 | 41 Nm | |
| 4AZ Holder with rubber mount to oil sump | F54/F55/F56/F57/F60 | M12 10.9 | 100 Nm | |
| 5AZ Holder with rubber mount to front axle support | F54/F55/F56/F57/F60 | M12 10.9 | 100 Nm |