Removing And Installing Left Or Right Front Door (Cooper, Cooper S, John Cooper Works)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not damage adjoining body parts.
The graphics are schematic representations and are to be applied to the relevant vehicle type.
Open door.
Removal:
Pull the lock (1) up and disconnect plug connection.
NOTE:
Secure door against closing.
Release screw (2) on door stop.
Open door up to stop.
Release screws between both hinge elements at top and bottom.
Unhinge door by shifting upwards and placing it on a suitable surface.
Installation:
Attach door and tighten down screws.
Tightening torque 41 51 1AZ .
Open door up to stop and secure it against falling shut.
Connect the connector (1).
Join door stop and tighten down with screw (2).
Tightening torque 51 21 2AZ .
Installation note:
If necessary, adjust the DOOR .