Quality Standard (Cooper, Cooper S, John Cooper Works)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

The overall requirements relating to a vehicle can only be implemented by including "all" components. This applies in particular to the body. With regard to an optimum crash result, it is necessary to maintain the structural measures.
The procedures described in the repair instructions must be complied with. Deviations are only permitted after arrangement with and approval by BMW. Should you have any questions, please contact the country-specific BMW .

The use of non-approved repair steps or tools may have serious consequences for the structure of the vehicle (e.g. in the event of a crash). In the end, this can result in safety and product liability risks which cannot be calculated.

Corrosion protection measures during and after repair work are vital for ensuring the vehicle retains its value.
For repair work, only use original BMW/MINI parts and approved auxiliary materials and operating fluids.
For repairs that are settled by a warranty or goodwill, only original BMW/MINI parts may be used.