REP-TAT-P-6761-02 Installing the convertible top drive unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Install the convertible top drive unit
- Place the convertible top drive unit (1) on the shaft (2) and swing upwards.
- Tighten down screw (3).
TIGHTENING TORQUE SPECIFICATION
| Soft top drive |
| 8 Nm |
- Connect connector (4).
- Fit cable tie (5).
Required follow-up work
Install CONVERTIBLE TOP