REP-TAT-P-5218-02 Installing the seat frame
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the rear seat backrest (5).
If necessary, feed in relative cables.
NOTE:
Perform the steps on the right and left side.
- Tighten the screws (4).
Tightening torques
TIGHTENING TORQUE SPECIFICATION
| Screw Replace screw. |
tightening torque 38 Nm |
- F56/57:
Correctly attach cable linkage (1) in holders (2) and (3).
Follow-up work
Install SEAT COVER WITH CUSHION
Install the THIGH SUPPORT on the front seat
Install the OUTER COVER on the front seat
Install the LEVER for seat height adjustment
Install the STEERING LEVER for backrest adjustment
Install the COVER for backrest adjustment
Install INNER COVER
Install FRONT SEAT