REP-TAT-P-5218-02 Installing the outer cover on the front seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
- Attach the retaining strap (1) in the outer cover (2).
- Feed in outer cover (3) into the guides (4) from front.
- Tighten the screws (1).
Tightening torques
TIGHTENING TORQUE SPECIFICATION
| Screw | tightening torque 1.5 Nm |
- Tighten the screw (2) from the bottom.
Tightening torques
TIGHTENING TORQUE SPECIFICATION
| Screw | tightening torque 1.5 Nm |