7212 Gas Generators, Airbag Module (Without Steering Wheel Airbag 3234)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (GAS GENERATOR, UNIT FOR PASSENGER'S SIDE)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Passenger airbag module & support to dashboard | R50/R53 | 10 Nm | ||
| R52 | 3.3 Nm | |||
| - to dashboard | R55/R56/R57/R58/R59/R60/R61 | 9 Nm | ||
| 2AZ Self-locking nut for gas generator - ITS head airbag | R50/R53 | 6 Nm | ||
| 3AZ Holder for gas generator tube - ITS head airbag | R50/R53 | 3.5 Nm | ||
| 4AZ Fastening belt to A- and C-pillars - ITS head airbag | R50/R53 | 11 Nm | ||
| 5AZ Head airbag, mounting clip and trim panel to holder - B-pillar Holder, folding pack for head airbag and ramp, to body (B-pillar) |
R50/R53 | 6 Nm | ||
| R56/R55 | 8 Nm | |||
| 6AZ Side airbag (front seat) to backrest frame | R50/R52/R53 | Replace screw. | 6 Nm | |
| R55/R56/R57/R58/R59/R61 | Replace screw. | 6.5 ±0.5 Nm | ||
| R60 | Replace nut. | 6.5 Nm | ||
| 7AZ Holder, front passenger airbag to dashboard | R50/R52/R53/R55/R56/R57/R58/R59/R60/R61 | 6 Nm | ||
| 8AZ Head airbag screw points | R60/R61 | 5 Nm | ||
| 9AZ Front passenger airbag holder to airbag module | R55/R56/R57/R58/R59/R60/R61 | 9 Nm | ||
| 10AZ Knee airbag to dashboard support | R60/R61 | 9 Nm |
TIGHTENING TORQUE SPECIFICATION
| Side airbag on rear seat backrest | ||
| Nut | Tightening torque | 6.5 Nm |