3160 Output Shaft

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION (OUTPUT SHAFT)

	Type	Thread	Tightening specifications	Dimension
1AZ Output shaft bearing to engine block	F54/F55/F56/F57/F60	M10		38 Nm
2AZ Output shaft to wheel bearing	F54/F55/F56/F57/F60	M16	Replace the collar screw.
			Joining torque	210 Nm
			Angle of rotation	90°