3112 Wishbone And Strut With Rubber Mount
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (WISHBONE)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wishbone to swivel bearing | F54/F55/F56/F57/F60 | M10 | Exclusively use the screw to tighten! Replace screw and nut. |
60 Nm |
| 2AZ Wishbone to front axle support | F54/F55/F56/F57/F60 | M12 | Tighten in normal position! Replace the screw and the square nut. |
|
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Holder, wishbone rubber mount, to front axle support | F54/F55/F56/F57/F60 | M12 | Replace screw. Observe installation position of the screws - different lengths! |
100 Nm |
| 4AZ Holder, wishbone rubber mount, to body | F54/F55/F56/F57/F60 | M10 | Replace screws. | |
| Joining torque | 56 Nm | |||
| Angle of rotation | 90° |