3111 Front Axle Carrier
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (FRONT SUBFRAME)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front axle support, front to body | F54/F55/F56/F57/F60 | M12 | Replace screws. | 108 Nm |
| 2AZ Rear end of front axle support to body | F54/F55/F56/F57/F60 | M14 | Replace screws. | 175 Nm |
| 3AZ Adapter, front axle support to front axle support | F54/F55/F56/F57/F60 | 100 Nm | ||
| 4AZ Thrust field to front axle | F57 | Replace screws. | ||
| Tightening torque | 56 Nm | |||
| Angle of rotation | 90° | |||
| 5AZ Thrust field to bumper cover/support | F57 | 3 Nm | ||
| 6AZ Torsion strut to front axle/body, middle | F57 | Tightening torque | 56 Nm | |
| Angle of rotation | 90° | |||
| 7AZ Torsion strut to side member | F57 | Tightening torque | 100 Nm | |
| Angle of rotation | 70° | |||
| 8AZ Cross-member on front subframe | F54 | Tightening torque | 56 Nm | |
| Angle of rotation | 45° |
TIGHTENING TORQUE SPECIFICATION
| Ride height sensor holder to front axle support | ||
| M6 | tightening torque | 8 Nm |