Removing and installing/replacing fuel level sensor (gasoline) (Cooper)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove DELIVERY UNIT .

Removal:

Disconnect plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock locking tab (1) and remove fuel level sensor (2) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install fuel level sensor (1) in the direction of the arrow.

IMPORTANT: Make sure the fuel level sensor engages correctly (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Connect plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install DELIVERY UNIT .