Removing and installing/replacing interior antenna for Comfort Access (rear seat) (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove REAR SEAT .

Removal:

Disconnect connector (1).

Disengage the interior antenna for Comfort Access (2) from the holder in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Join the interior antenna for Comfort Access (2) with the holder in the direction of the arrow.

Connect the connector (1).

Installation note:

Make sure the interior antenna for Comfort Access (2) has correctly engaged with the detents on the holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install REAR SEAT .