Removing and installing/replacing both fanfare horn horns (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove front BUMPER COVER .

Removal:

Unlock and disconnect connector (1) on cable clip.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and feed out holder with fanfare horns (2) downwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in holder with fanfare horns (2) from below and tighten with screws (1).

Tightening torque 61 33 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connector (1) to cable clip.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install front BUMPER COVER .