Crimping Micro Quadlock System contacts (MQS) (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 4 320

To crimp MPQ contacts, use hand pliers 61 4 321 (1) in conjunction with crimping head 61 4 324 (2) from crimping set 61 4 320.

NOTE: Hand pliers (1) open automatically until stop when handles are pressed together.

G04727516

Courtesy of BMW OF NORTH AMERICA, INC.

Open hand pliers (1).

Fold up contact carrier (2).

Insert MQS contact (3) in contact carrier (2).

Fold back contact carrier (2).

G04727517

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Follow procedure for cutting and stripping off insulation from cables.

Close hand pliers (1) one notch.

Insert stripped cable (2).

Close hand pliers (1) fully.

G04727518

Courtesy of BMW OF NORTH AMERICA, INC.

Open hand pliers (1).

Open contact carrier (2) gently and carefully remove MQS contact.

IMPORTANT: Check contact for correct crimping.

G04727519

Courtesy of BMW OF NORTH AMERICA, INC.