Control unit plugs, 25-, 35-, 55-, 83-, 88-pin (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 61 0 312
- 61 0 314
- 61 0 315
- 61 0 323
Unscrew the screws (1).
Lever out pin sensor (2) with gasket (3) in arrow direction.
Remove gasket (3).
Pull out housing lock (4) in arrow direction and unlock.
Press down snap-in hooks (5) of corresponding contact and pull out cable with contact.
Special tool 61 0 312 (61 1 134) for mini flat spring contacts.
Special tool 61 0 314 (61 1 135) for mini flat spring contacts.
Special tool 61 0 315 (61 1 151) for double flat spring contacts (dual snap-in hooks).
Special tool 61 0 323 (61 1 152) for double flat spring contacts (special snap-in hooks).