Circular connector, 13-pin, system D2.5 (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 0 303

Detach rubber grommet (1).

Carefully pull out locking mechanism (2) in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.

Shift lower section of connector (3) in arrow direction until retaining lugs (4) snap into release groove (5).

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303, press down retaining lugs (6) of corresponding contact and pull out cable.

Courtesy of BMW OF NORTH AMERICA, INC.