Removing and installing battery cover (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
,
Comply with NOTES for disconnecting and connecting the vehicle battery and
INSTRUCTIONS on intelligent battery sensor (IBS).
Observe and follow SAFETY INSTRUCTIONS for handling vehicle battery.
,
Comply with NOTES for disconnecting and connecting the vehicle battery and
INSTRUCTIONS on intelligent battery sensor (IBS).
Removal:
Partially detach seal (1).
Loosen cap nuts (1).
open locks (2) by turning them couterclockwise.
Remove windshield panel cover (3).
Unscrew the screws (1).
Remove battery cover (2).
Installation:
Thread in the battery cover (2).
Tighten down screws (1).
Tightening torque 61 21 6AZ .
Thread in the windshield panel cover (3).
Turn the locks (2) to the right until the stop is reached.
Tighten cap nuts (1).
Tightening torque 61 21 6AZ .
Join gasket (1).