Removing and installing/replacing insulation lining on engine hood/hood (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Work explained using the F56 MINI Cooper ECE as an example, details may deviate in other models.

Removal :

Remove the clips from the damping layer

Remove damping layer.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation :

Parts note:

Replace faulty clips.

Position the damping layer and secure using clips.

Courtesy of BMW OF NORTH AMERICA, INC.