Removing and installing/replacing underbody protection (front) (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Removal :
Unscrew all bolts.
Fold and remove front underbody protection (1).
Installation :
Insert rear underbody protection (1) and place on screw points.
Tighten down all screws.
Tightening torque 51 71 5AZ .