Removing and installing/replacing top cover on tail panel (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove LUGGAGE COMPARTMENT FLOOR COVERING .

Removal :

Remove expanding rivet (1).

Take out trim (2) over the left and right lashing points.

Remove trim (2) from the clamps (3) upwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation :

Install trim (2) and engage in clamps (3).

Insert trim (2) over the left and right lashing points

Install expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install LUGGAGE COMPARTMENT FLOOR COVERING .