Removing and installing/replacing instrument panel trim, bottom right (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Removal :

Unscrew the screws (1).

Lower trim panel (2) slightly and disconnect plug connections behind it.

Pull out the trim panel (2) from the guides (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement (depending on version):

Remount LOUDSPEAKER .

NOTE: TECHNICAL INFORMATION
Detents, guides and mounting elements must not be damaged or missing.

Feed in the trim panel (1) in the guides (2).
Connect the plug connection behind it.

Set the trim panel (1) upwards and tighten the screws (3).

TIGHTENING TORQUE SPECIFICATION

Bottom trim panel to bracket
Screw
	tightening torque
	2.4 Nm

Installation :

Engage the trim panel (1) in the guides (2).

Connect plug connections.

Tighten down screws (3).

Courtesy of BMW OF NORTH AMERICA, INC.