Removing and installing/replacing striker on engine compartment lid (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Removal:
Loosen the locks (1) and remove the cover (2).
Unscrew striker (3).
Installation:
Screw in striker (3).
Mount cover (2).
Make sure the locks (1) engage.
Required reworking:
- Adjust ENGINE COMPARTMENT LID .