Removing and installing/replacing the window channel strip on the inside of the front door (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work needed:
- Remove front door TRIM PANEL .
- The INSTRUCTIONS on installation of window guides serve as the basis for this repair instructions and must be observed without fail.
IMPORTANT:
Risk of damage!
If window channel strip is reused, make sure it is not bent.
If window channel strip is reused, make sure it is not bent.
Removal:
Release window channel strip (1) from holders (2) and detach upwards.
Installation:
Shaped part (1) and retaining elements (2) of window channel strip (3) must not be damaged.
Shaped part (1) must be correctly threaded into the door.
Coat window CHANNEL STRIP (3) prior to lining with approved lubricant.
If necessary, remove clamps from window channel strip and attach to door.
Replace faulty clamps.
Engage window channel strip (1) in holders (2) and connect to door.
Ensure that window channel strip (1) has the right installation position on door (2) and side window (3).
Required reworking:
- Install front door TRIM PANEL .