REP-TAT-P-5112-01 Remove rear bumper panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.

Detach wheel arch trim (1) from the detents along the dashed line.
Detach the wheel arch trim (1) at the clips (2) and (3).
Loosen screws (1) left and right.

Courtesy of BMW OF NORTH AMERICA, INC.

Release all bolts (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.

Release the bumper cover (1) from the detents in dashed line area.
Remove the bumper cover (1) with the help of a support person.

Unlock and disconnect the plug connections for the rear fog lights and/or ultrasonic sensors.