Installing/replacing license plate (without number plate baseplate) (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 2 359 574
Place template 2 359 574 on license plate and center.
Mark and drill/punch drilled holes on license plate.
Deburr bores on the license plate.
Position template 2 359 574 on bumper cover and align using the marks (1).
Align template horizontally.
Mark drilled holes on bumper cover.
Remove template.
IMPORTANT:
Do not pre-drill!
Mount license plate to bumper cover using license plate screws and the corresponding protective caps.