Front Brakes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BRAKES SPECIFICATIONS
| Minimum brake disc thickness MIN TH (nominal dimension 335x30) | ||
| Minimum brake disc thickness MIN TH 335x30) | brake disc | |
| 28.4 mm | ||
FRONT BRAKE F57 SPECIFICATIONS
|
IMPORTANT:
New brake pads may only be installed if the brake disk thickness is greater than the minimum brake disc thickness.
Minimum brake disc thickness during general inspection (Gl): Nominal size thickness minus 2.4 mm (Not applicable to perforated brake discs) Perforated brake discs: Nominal size thickness minus 1.6 mm Depending on:
different brake discs can be fitted The brake discs must always be assigned by way of the relevant vehicle identification number |
||
| Thickness difference in the friction surfaces of the brake disc | Max. mm | 0.01 |
| Nominal size (diameter x thickness) | mm | 280x22 |
| Nominal size (diameter x thickness) | mm | 294x22 |
| Minimum brake disc thickness stamped on brake disc chamber | mm | 20.4 |
| Pad wear warning from remaining brake pad thickness | mm | 3.7 |