Connecting Rod With Bearing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
B36 ENGINE (COOPER BASE):
CONNECTING ROD WITH BEARING SPECIFICATION
| B36 (1.5L) Large connecting rod eye (without bearing) |
mm | 53.600... 53.616 |
| Connecting rod connector: Inner diameter | mm | 22.000+0.004 +0.013 |
| Connecting rod connector: Outer diameter | mm | 24.02+0.011 -0.015 |
| Permissible total deviation of connecting rods in one engine (without connecting rod bearing shell) |
g | ± 4 |
B46 AND B48 ENGINES (COOPER S AND JCW):
CONNECTING RODS AND BEARINGS SPECIFICATION
| Ø Large connecting rod eye (without bearing) | mm | 53.600... 53.619 |
| Conrod bush: Inner diameter | mm | 22.004... 22.013 |
| Conrod bush: Outer diameter | mm | 24.005... 24.031 |
| Permissible total deviation of connecting rods in one engine (without connecting rod bearing shell) | g | ± 4 |