21 52 500 Removing and installing/replacing clutch master cylinder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove bearing bracket for foot pedal.

Removal:

Press pin (1) together and press out.

Release nuts (2) and remove clutch master cylinder.

Fig 1: Clutch Master Cylinder Pin And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert bolt (1).

Install clutch master cylinder and tighten nuts (2).

Tightening torque 21 52 2AZ .

IMPORTANT: After completing work vent clutch hydraulic system.

Fig 2: Clutch Master Cylinder Nuts And Bolt

Courtesy of BMW OF NORTH AMERICA, INC.