Gas generator, unit for passenger's side
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - GAS GENERATOR, UNIT FOR PASSENGER'S SIDE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| AZ Passenger airbag module & support; to dashboard | R50/R53 | 10 Nm | ||
| R52 | 3.3 Nm | |||
| - to dashboard | R55/R56/R57/R58/R59/R60/R61 | 9 Nm | ||
| 2AZ Self-locking nut for gas generator - ITS head airbag | R50/R53 | 6 Nm | ||
| 3AZ Holder for gas generator tube - ITS head airbag | R50/R53 | 3.5 Nm | ||
| 4AZ Fastening belt to A-and C-pillars - ITS head airbag | R50/R53 | 11 Nm | ||
| 5AZ Head airbag, mounting clip and trim panel to holder - B-pillar Holder, folding pack for head airbag and ramp, to body (B-pillar) |
R50/R53 | 6 Nm | ||
| R56/R55 | 8 Nm | |||
| 6AZ Side airbag (front seat) to backrest frame | R50/R52/R53 | Renew screw. | 6 Nm | |
| R55/R56/R57/R58/R59/R61 | Renew screw. | 6.5 ±0.5 Nm | ||
| R60 | Renew nut. | 6.5 Nm | ||
| 7AZ Holder, front passenger airbag to dashboard | R50/R52/R53/R55/R56/R57/R58/R59/R60/R61 | 6 Nm | ||
| 8AZ Head airbag screw points | R60/R61 | 5 Nm | ||
| 9AZ Front passenger airbag holder to airbag module | R55/R56/R57/R58/R59/R60/R61 | 9 Nm | ||
| 10AZ Knee airbag to dashboard support | R60/R61 | 9 Nm |