52 13 101 Replacing the Bowden cable of the right seat rail

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Carry out work on the right side in the same way as for the left side illustrated here.

Preliminary work needed:

Remove front seat driver's seat
Remove OUTER COVER ON FRONT SEAT

Removal:

Release screw (1) on seat (4).

Guide the Bowden cable with adjustment mechanism (2) out of the backrest adjustment (3).

Fig 1: Removing Screw On Seat

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip the Bowden cable (1) in the marked area.

Fig 2: Locating Bowden Cable Area

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clip in the Bowden cable (1) in the marked area.

Fig 3: Locating Bowden Cable Area

Courtesy of BMW OF NORTH AMERICA, INC.

Position Bowden cable with adjustment mechanism (2) on backrest adjustment (3).

Tighten screw (1) on seat (4).

Fig 4: Removing Screw On Seat

Courtesy of BMW OF NORTH AMERICA, INC.