Removing and installing/replacing the interior antenna for Comfort Access (front cup holder)

Preliminary work needed: 

• Remove the FRONT CUP HOLDER .

Removal: 

Loosen the detents (1) on the holder (3).

Remove the interior antenna for Comfort Access (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert the interior antenna for Comfort Access (2) into the holder (3).

Installation note: 

Make sure the interior antenna for Comfort Access (2) is correctly engaged with the detent (1) of the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install CUP HOLDER, FRONT .