Removing and installing/replacing USB audio interface connecting socket

Removal:

Remove interior trim (1) to the rear from the detents.

Courtesy of BMW OF NORTH AMERICA, INC.

Press the detents together at the sides and feed out trim (1) to the rear.

Disconnect associated plug connection.

Courtesy of BMW OF NORTH AMERICA, INC.

Release detent on both sides and press connecting socket (1) out of trim (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clip connecting socket (1) into the trim (2).

NOTE: Ensure connecting socket (1) engages correctly in trim (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Detents on cover (1) must not be damaged or missing.

Connect associated connector.

Clip in cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Install trim (1) and engage in the detent.

Courtesy of BMW OF NORTH AMERICA, INC.