Replace pulse sensor on exhaust camshaft (B36, B38) (Cooper)

Preliminary work needed: 

• Remove ACOUSTIC COVER .

Removal: 

Unlock ventilation line (1) and detach from cylinder head cover.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock connector (1) and detach.

Remove screw (2).

Remove pulse generator (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Check gasket, replace damaged gasket.

Part:  Gasket

Install pulse sensor (3).

Tighten screw (2).

Tightening torque 13 62 1AZ .

Attach connector (1).

Connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect ventilation line (1) to cylinder head cover.

Ventilation line (1) must snap audibly into place on cylinder head cover.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install the ACOUSTIC COVER .