2611 Propeller Shaft, One-Part Or Multi-Part
26 11 PROP SHAFT. COMPLETE - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Prop shaft plugged into transfer box PTO (recessed nut) | F54 ALL/F60 ALL | Torque | 80 Nm | |
| 2AZ Rear flexible disc to rear axle final drive | F54 ALL/F60 ALL | Replace screws; joining torque and angle of rotation must be observed without fail. | ||
| Joining torque | 55 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Flexible disc, rear, to prop shaft | F54 ALL/F60 ALL | Replace screws and nuts; joining torque and angle of rotation must be observed without fail. | ||
| Joining torque | 55 Nm | |||
| Angle of rotation | 90° | |||
| 4AZ Central mount to body | F54 ALL/F60 ALL | 19 Nm | ||
| 5AZ Front prop shaft to rear prop shaft (flange nut) | F54 ALL/F60 ALL | Replace flange nut, Snapring, sealing ring. | 90 Nm | |