Replacing wheel bearing (hub) for rear wheel (FWD)

Preliminary work needed: 

• Remove the rear WHEEL .
• Remove rear BRAKE BLADE .

Removal: 

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Remove wheel bearing (hub).

Installation: 

Keep contact surfaces (1) of wheel carrier and wheel bearing (hub) clean and free from oil and grease.

Courtesy of BMW OF NORTH AMERICA, INC.

Align new wheel bearing (hub) to trailing arm.

Tighten down screws (1).

Part  : Replace screws (1).

Tightening torque 33 41 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install rear BRAKE DISC .
• Install rear WHEEL .