REP-TAT-P-5218-25 When replacing the backrest frame: Remount components

• Drill out the blind rivet (1).
• Loosen the detents (2).
• Feed out support (3) from the backrest frame (4).

Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the detents (1).
• Feed out head restraint guides (2) upwards from the backrest frame (3).

Courtesy of BMW OF NORTH AMERICA, INC.

• Detach lumbar support (3) from the holders (1) and backrest frame (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Cover working area and drill out blind rivet (1).
• Remove adjuster (2) and take it out with the Bowden cable from the backrest frame.

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the adjuster (2) with Bowden cable in the backrest frame.
• Replace the blind rivets (1).

  Parts:  Blind rivet

• Secure adjuster (2) with the blind rivet (1) on the backrest frame.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach lumbar support (3) in holders (1) and backrest frame (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Ensure that the headrest guide (2) is installed on the left side with the lock for head restraint when facing the direction of travel.
• Insert the head restraint guides (2) correctly from the top in the backrest frame (3).

The detents (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Parts:  Blind rivet