Replacing the Bowden cable of the right seat rail
NOTE:
Carry out work on the right side in the same way as for the left side illustrated here.
Preliminary work needed:
- Remove front seat DRIVER'S SEAT
- Remove OUTER COVER on front seat.
Removal:
Release screw (1) on seat (4).
Guide the Bowden cable with adjustment mechanism (2) out of the backrest adjustment (3).
Unclip the Bowden cable (1) in the marked area.
Installation:
Clip in the Bowden cable (1) in the marked area.
Position Bowden cable with adjustment mechanism (2) on backrest adjustment (3).
Tighten screw (1) on seat (4).
Required follow-up work:
- Install OUTER COVER on front seat.
- Install front seat DRIVER'S SEAT