LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Body Equipment - Repair -- Cooper (F54) >> 51 76 Seals >> Removing and installing/replacing rear engine hood seal

Removing and installing/replacing rear engine hood seal

NOTE: For purposes of clarity, engine compartment lid shown removed.

Removal: 

Detach gasket (1) towards the top.

G12668132Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Press gasket (1) towards the bottom.

NOTE: Ensure gasket (1) is seated correctly.
G12668132Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals